The basic building strategy and general assumptions have been detailed on a previous post: Staged Building:
$ pwd
/stage/build
$ ./gnu-build-preparation ../source/.../make-4.2.1.tar.bz2
...
$ cd make/make-4.2.1-64
$ source ../setenv 64
CONFIG_SHELL=/usr/bin/bash
CC=/usr/bin/gcc CFLAGS=-m64 -march=core2 -std=gnu89
CXX=/usr/bin/g++ CXXFLAGS=-m64 -march=core2 -std=gnu++03
LD=/usr/bin/ld LDFLAGS=-m64 -march=core2
PATH=/opt/gnu/bin:/usr/gnu/bin:/usr/bin:/usr/sbin
PKG_CONFIG_PATH=
Suggested build sequence:
Fine-tune/fix config.h.in, Makefile.in and others...
$ ./configure \
--build=x86_64-pc-solaris2.11 \
--prefix=/opt/... \
...
$ gmake -j3
For IPS package:
$ gmake DESTDIR=/stage/prototype/make/4.2.1/64 install
For immediate use:
$ sudo gmake install
$ sudo zfs snapshot -r .../opt/...@make-4.2.1
Personal notes and recipes, views and opinions.
If it must run, it runs on Solaris!
Wednesday, April 11, 2018
Sunday, March 25, 2018
Building GNU automake 1.16.1
I start with the same considerations from the post Building autoconf 2.69. The GNU automake library is sometimes used on GNU buildings so I add it to my crazy list
of GNU software to manually build.
NOTE
The basic building strategy and general assumptions have been detailed on a previous post: Staged Building, so I'll (hopefully) get more straight to the point:
$ pwd
/stage/build
$ ./gnu-build-preparation ../source/.../automake-1.16.1.tar.xz
...
$ cd automake/automake-1.16.1-64
$ source ../setenv 64
CONFIG_SHELL=/usr/bin/bash
CC=/usr/bin/gcc CFLAGS=-m64 -march=core2 -std=gnu89
CXX=/usr/bin/g++ CXXFLAGS=-m64 -march=core2 -std=gnu++03
LD=/usr/bin/ld LDFLAGS=-m64 -march=core2
PATH=/opt/gnu/bin:/usr/gnu/bin:/usr/bin:/usr/sbin
PKG_CONFIG_PATH=
Suggested build sequence:
Fine-tune/fix config.h.in, Makefile.in and others...
$ ./configure \
--build=x86_64-pc-solaris2.11 \
--prefix=/opt/... \
...
$ gmake -j3
For IPS package:
$ sudo gmake DESTDIR=/stage/prototype/automake/1.16.1/64 install
For immediate use:
$ sudo gmake install
$ sudo snapshot -r .../opt/...@automake-1.16.1
NOTE
On this post I'm using the lastest GNU automake verion at the time of this writing. But sometimes one particular version simply doesn't work. For instance, version 1.16 fails building, but version 1.16.1 succeeds.
The basic building strategy and general assumptions have been detailed on a previous post: Staged Building, so I'll (hopefully) get more straight to the point:
$ pwd
/stage/build
$ ./gnu-build-preparation ../source/.../automake-1.16.1.tar.xz
...
$ cd automake/automake-1.16.1-64
$ source ../setenv 64
CONFIG_SHELL=/usr/bin/bash
CC=/usr/bin/gcc CFLAGS=-m64 -march=core2 -std=gnu89
CXX=/usr/bin/g++ CXXFLAGS=-m64 -march=core2 -std=gnu++03
LD=/usr/bin/ld LDFLAGS=-m64 -march=core2
PATH=/opt/gnu/bin:/usr/gnu/bin:/usr/bin:/usr/sbin
PKG_CONFIG_PATH=
Suggested build sequence:
Fine-tune/fix config.h.in, Makefile.in and others...
$ ./configure \
--build=x86_64-pc-solaris2.11 \
--prefix=/opt/... \
...
$ gmake -j3
For IPS package:
$ sudo gmake DESTDIR=/stage/prototype/automake/1.16.1/64 install
For immediate use:
$ sudo gmake install
$ sudo snapshot -r .../opt/...@automake-1.16.1
Monday, March 19, 2018
Building GNU autoconf 2.69
I start with the same considerations from the post Building GNU m4. The GNU autoconf library is sometimes used on GNU buildings so I add it to my crazy list
of GNU software to manually build.
The basic building strategy and general assumptions have been detailed on a previous post: Staged Building, so I'll (hopefully) get more straight to the point:
$ pwd
/stage/build
$ ./gnu-build-preparation ../source/.../autoconf-2.69.tar.xz
...
$ cd autoconf/autoconf-2.69-64
$ source ../setenv 64
CONFIG_SHELL=/usr/bin/bash
CC=/usr/bin/gcc CFLAGS=-m64 -march=core2 -std=gnu89
CXX=/usr/bin/g++ CXXFLAGS=-m64 -march=core2 -std=gnu++03
LD=/usr/bin/ld LDFLAGS=-m64 -march=core2
PATH=/opt/gnu/bin:/usr/gnu/bin:/usr/bin:/usr/sbin
PKG_CONFIG_PATH=
Suggested build sequence:
Fine-tune/fix config.h.in, Makefile.in and others...
$ ./configure \
--build=x86_64-pc-solaris2.11 \
--prefix=/opt/... \
...
$ gmake -j4
For IPS package:
$ sudo gmake DESTDIR=/stage/prototype/autoconf/2.69/64 install
For immediate use:
$ sudo gmake install
$ sudo zfs snapshot -r .../opt/...@autoconf-2.69
The basic building strategy and general assumptions have been detailed on a previous post: Staged Building, so I'll (hopefully) get more straight to the point:
$ pwd
/stage/build
$ ./gnu-build-preparation ../source/.../autoconf-2.69.tar.xz
...
$ cd autoconf/autoconf-2.69-64
$ source ../setenv 64
CONFIG_SHELL=/usr/bin/bash
CC=/usr/bin/gcc CFLAGS=-m64 -march=core2 -std=gnu89
CXX=/usr/bin/g++ CXXFLAGS=-m64 -march=core2 -std=gnu++03
LD=/usr/bin/ld LDFLAGS=-m64 -march=core2
PATH=/opt/gnu/bin:/usr/gnu/bin:/usr/bin:/usr/sbin
PKG_CONFIG_PATH=
Suggested build sequence:
Fine-tune/fix config.h.in, Makefile.in and others...
$ ./configure \
--build=x86_64-pc-solaris2.11 \
--prefix=/opt/... \
...
$ gmake -j4
For IPS package:
$ sudo gmake DESTDIR=/stage/prototype/autoconf/2.69/64 install
For immediate use:
$ sudo gmake install
$ sudo zfs snapshot -r .../opt/...@autoconf-2.69
Building GNU m4 1.4.18
I start with the same considerations from the post Building GNU libtool 2.4.6. The GNU m4 library is sometimes used on GNU buildings so I add it to my crazy list
of GNU software to manually build.
The basic building strategy and general assumptions have been detailed on a previous post: Staged Building, so I'll (hopefully) get more straight to the point:
$ pwd
/stage/build
$ ./gnu-build-preparation ../source/.../m4-1.4.18.tar.xz
...
$ cd m4/m4-1.4.18
$ source ../setenv 64
CONFIG_SHELL=/usr/bin/bash
CC=/usr/bin/gcc CFLAGS=-m64 -march=core2 -std=gnu89
CXX=/usr/bin/g++ CXXFLAGS=-m64 -march=core2 -std=gnu++03
LD=/usr/bin/ld LDFLAGS=-m64 -march=core2
PATH=/opt/gnu/bin:/usr/gnu/bin:/usr/bin:/usr/sbin
PKG_CONFIG_PATH=
Suggested build sequence:
Fine-tune/fix config.h.in, Makefile.in and others...
$ ./configure \
--build=x86_64-pc-solaris2.11 \
--prefix=/opt/... \
...
$ gmake -j3
For IPS package:
$ sudo gmake DESTDIR=/stage/prototype/m4/1.4.18/64 install
For immediate use:
$ sudo gmake install
$ sudo zfs snapshot -r .../opt/...@m4-1.4.18
The basic building strategy and general assumptions have been detailed on a previous post: Staged Building, so I'll (hopefully) get more straight to the point:
$ pwd
/stage/build
$ ./gnu-build-preparation ../source/.../m4-1.4.18.tar.xz
...
$ cd m4/m4-1.4.18
$ source ../setenv 64
CONFIG_SHELL=/usr/bin/bash
CC=/usr/bin/gcc CFLAGS=-m64 -march=core2 -std=gnu89
CXX=/usr/bin/g++ CXXFLAGS=-m64 -march=core2 -std=gnu++03
LD=/usr/bin/ld LDFLAGS=-m64 -march=core2
PATH=/opt/gnu/bin:/usr/gnu/bin:/usr/bin:/usr/sbin
PKG_CONFIG_PATH=
Suggested build sequence:
Fine-tune/fix config.h.in, Makefile.in and others...
$ ./configure \
--build=x86_64-pc-solaris2.11 \
--prefix=/opt/... \
...
$ gmake -j3
For IPS package:
$ sudo gmake DESTDIR=/stage/prototype/m4/1.4.18/64 install
For immediate use:
$ sudo gmake install
$ sudo zfs snapshot -r .../opt/...@m4-1.4.18
Saturday, March 17, 2018
Building GNU libtool 2.4.6
I start with the same considerations from the post Building GNU libsigsegv 2.12. The GNU libtool library is sometimes used on GNU buildings so I add it to my crazy list
of GNU software to manually build.
The basic building strategy and general assumptions have been detailed on a previous post: Staged Building, so I'll (hopefully) get more straight to the point:
$ pwd
/stage/build
$ ./gnu-build-preparation ../source/.../libtool-2.4.6.tar.xz
Processing /stage/source/.../libtool-2.4.6.tar.xz
------------------------------------
App: libtool
Ver: 2.4.6
------------------------------------
In the process, the following ZFS datasets will be created:
rpool/stage/build/libtool
rpool/stage/build/libtool/libtool-2.4.6
rpool/stage/build/libtool/libtool-2.4.6-32
rpool/stage/build/libtool/libtool-2.4.6-64
rpool/stage/prototype/libtool
rpool/stage/prototype/libtool/libtool-2.4.6
rpool/stage/prototype/libtool/libtool-2.4.6/32
rpool/stage/prototype/libtool/libtool-2.4.6/64
Enter "y" to proceed: y
Creating rpool/stage/build/libtool...
Creating rpool/stage/build/libtool/libtool-2.4.6...
rpool/stage/build/libtool
rpool/stage/build/libtool/libtool-2.4.6
rpool/stage/build/libtool/libtool-2.4.6@source
rpool/stage/build/libtool/libtool-2.4.6-32
rpool/stage/build/libtool/libtool-2.4.6-32@start
rpool/stage/build/libtool/libtool-2.4.6-64
rpool/stage/build/libtool/libtool-2.4.6-64@start
Creating data-0/stage/prototype/libtool subtree.
rpool/stage/prototype/libtool
rpool/stage/prototype/libtool/2.4.6
rpool/stage/prototype/libtool/2.4.6/32
rpool/stage/prototype/libtool/2.4.6/64
Creating pre-configuration script.
$ cd libtool/libtool-2.4.6-64
$ source ../setenv 64
...
The basic building strategy and general assumptions have been detailed on a previous post: Staged Building, so I'll (hopefully) get more straight to the point:
$ pwd
/stage/build
$ ./gnu-build-preparation ../source/.../libtool-2.4.6.tar.xz
Processing /stage/source/.../libtool-2.4.6.tar.xz
------------------------------------
App: libtool
Ver: 2.4.6
------------------------------------
In the process, the following ZFS datasets will be created:
rpool/stage/build/libtool
rpool/stage/build/libtool/libtool-2.4.6
rpool/stage/build/libtool/libtool-2.4.6-32
rpool/stage/build/libtool/libtool-2.4.6-64
rpool/stage/prototype/libtool
rpool/stage/prototype/libtool/libtool-2.4.6
rpool/stage/prototype/libtool/libtool-2.4.6/32
rpool/stage/prototype/libtool/libtool-2.4.6/64
Enter "y" to proceed: y
Creating rpool/stage/build/libtool...
Creating rpool/stage/build/libtool/libtool-2.4.6...
rpool/stage/build/libtool
rpool/stage/build/libtool/libtool-2.4.6
rpool/stage/build/libtool/libtool-2.4.6@source
rpool/stage/build/libtool/libtool-2.4.6-32
rpool/stage/build/libtool/libtool-2.4.6-32@start
rpool/stage/build/libtool/libtool-2.4.6-64
rpool/stage/build/libtool/libtool-2.4.6-64@start
Creating data-0/stage/prototype/libtool subtree.
rpool/stage/prototype/libtool
rpool/stage/prototype/libtool/2.4.6
rpool/stage/prototype/libtool/2.4.6/32
rpool/stage/prototype/libtool/2.4.6/64
Creating pre-configuration script.
$ cd libtool/libtool-2.4.6-64
$ source ../setenv 64
...
Subscribe to:
Posts (Atom)